---
title: "ASTM D1212"
url: "https://mat-cs.com/astm-d1212"
description: "These test methods cover the determination of wet film thickness of organic coatings such as paint, varnish, and lacquer."
---

ASTM Standard

# ASTM D1212

Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings

[Back to all techniques](/analytical-techniques/)

## Significance and Use

4.1 Wet film thickness measurements aid in the prediction of dry film thickness. In instances where dry film thickness cannot be measured nondestructively, wet film thickness is frequently specified. Also, the ability to determine wet film thickness during application can provide the opportunity to correct the application procedures.

## Scope

1.1 These test methods cover the determination of wet film thickness of organic coatings such as paint, varnish, and lacquer. Two methods are described as follows:

1.1.1 In _Test Method A_, the Wet Film Thickness Gage (English or Metric graduation (see 5.1)) is used to measure wet film thicknesses up to 60 mils on the English scale series, and up to 700 μm on the metric scale series (Sections 5 – 8).

1.1.2 In _Test Method B_, the Pfund Gage is used to measure wet film thicknesses up to 14.2 mils (360 μm) (Sections 9 – 13).

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.