Materials Characterization Services
Search for Analytical Techniques and Test Methods
We are currently working on updating our list of supported methods. If you don’t see the test method you need below, please submit a special request with details about the method you need and we will check to see if we can provide it.
ASTM B279 – Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication Description: Significance and Use 3.1 This test method is designed as an inspection or acceptance test of new bare soft square and rectangular wire intended for subsequent fabrication into magnet wire. NOTE 1: Since the …
ASTM B277 – Standard Test Method for Hardness of Electrical Contact Materials Description: Significance and Use 3.1 The Rockwell hardness and Rockwell superficial tests are useful when the test specimens are sufficiently thick (in relation to the indentor load) to ensure that the results are not affected by the flow of metal on the surface of …
ASTM B276 – Standard Test Method for Apparent Porosity in Cemented Carbides Description: Significance and Use 4.1 Cemented carbide materials may contain small voids that, depending on the application, may affect the performance of the product. To assist users in specifying the maximum acceptable level of porosity, this test method illustrates a broad range of porosity …
ASTM B263 – Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors Description: Abstract This test method covers the standard procedure for determining the cross-sectional area of stranded conductors by the mass method. The apparatus shall consist of a balance for mass measurement, a steel scale for length measurement, and a jig or …
ASTM B244 – Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments Description: Significance and Use 5.1 The thickness of a coating is often critical to its performance. This eddy-current method is nondestructive and is suitable for measuring the thickness of …
ASTM B23 – Standard Specification for White Metal Bearing Alloys (Known Commercially as “Babbitt Metal”) Description: Abstract This specification deals with eight typical white metal bearing alloys, in bar or ingot form, known commercially as “Babbitt metal.” Covered in this specification are tin-based alloys, namely, UNS-L13910 (alloy no. 1), UNS-L13890 (alloy no. 2), UNS-L13840 (alloy …
ASTM B215 – Standard Practices for Sampling Metal Powders Description: Significance and Use 4.1 Specifications and test methods for metal powders and metal powder products require the sampling, testing, and performance evaluation of small samples taken from large quantities of powder. The sampling procedure is equally as important as the testing and evaluation; the sampling methods …
ASTM B213 – Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel Description: Significance and Use 5.1 The rate and uniformity of die cavity filling are related to flow properties, which thus influence production rates and uniformity of compacted parts. 5.2 The ability of a powder to flow is a function of …
ASTM B212 – Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel Description: Significance and Use 5.1 This test method provides a guide for evaluation of an important physical characteristic of a powder known as the apparent density. The measured apparent density bears a relationship to the mass of powder …
ASTM B170 – Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes Description: Abstract This specification covers grade 1 ( UNS C10100) and grade 2 (UNS C10200) of oxygen-free electrolytic copper wire bars, billets, and cakes produced without the use of metallic or metaloidal deoxidizers. The chemical composition of each grade shall be in accordance with the …
