Materials Characterization Services
Search for Analytical Techniques and Test Methods
We are currently working on updating our list of supported methods. If you don’t see the test method you need below, please submit a special request with details about the method you need and we will check to see if we can provide it.
ASTM D2108 – Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale) Description: 1.1 This test method covers the visual measurement of the color of halogenated organic solvents and their admixtures. It is valid for values of 50 platinum-cobalt (Pt-Co) units or less. 1.2 The values stated in SI units are to …
ASTM D2106 – Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents Description: Significance and Use 4.1 This test method is useful for the determination of the amount of acid acceptance contributed by amines or bases as compared to other acid-accepting compounds. Scope 1.1 These test methods, where applicable, cover the determination …
ASTM D2099 – Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester Description: Significance and Use 3.1 This test method is intended to estimate the water resistance of shoe upper leather. The flex imparted to the leather is similar to the flex given the vamp of the shoe …
ASTM D2095 – Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens Description: Significance and Use 4.1 Tension tests provide reasonably accurate information with regard to the tensile strength of adhesives. Tensile strength data may be suitable for specification acceptance, service evaluation, manufacturing control, research, and development. Tension tests are …
ASTM D2094 – Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests Description: Significance and Use 4.1 The procedures outlined in this practice are designed to standardize the test specimens, surface preparations, combinations of materials, and adhesive selection. Because of the flexibility in the procedure, it is important to have some idea of …
ASTM D2091 – Standard Test Method for Print Resistance of Lacquers Description: Significance and Use 4.1 An unsatisfactory appearance can result from pressure deformation of a film inherently too soft or containing residual solvent. This test method is primarily used to evaluate the resistance of a lacquer finish to printing under the conditions of packaging, shipping, …
ASTM D2086 – Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde Description: Significance and Use 4.1 This test method provides a measurement of total acidity in vinyl acetate and acetaldehyde. The results of these measurements can be used for specification acceptance. Scope 1.1 This test method covers the determination of total acidity as acetic acid …
ASTM D2084 – Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter Description: Significance and Use 5.1 This test method is used to determine the vulcanization characteristics of (vulcanizable) rubber compounds. 5.2 This test method may be used for quality control in rubber manufacturing processes, for research and development testing of raw-rubber compounded in an …
ASTM D2083 – Standard Test Method for Calculation of Percent of Primary, Secondary, and Tertiary Amines in Fatty Amines (Withdrawn 2007) Description: Scope 1.1 This test method covers calculation of the percent of primary, secondary, and tertiary amines in the sample from determinations of primary, secondary, and tertiary amine values and percent of non-amine. 1.2 …
ASTM D2074 – Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method Description: Abstract These alternative test methods cover the indicator procedure for determining the total, primary, secondary, and tertiary amine values of fatty amines. These procedures are not applicable to fatty amidoamines and fatty diamines. …
