Materials Characterization Services
Search for Analytical Techniques and Test Methods
We are currently working on updating our list of supported methods. If you don’t see the test method you need below, please submit a special request with details about the method you need and we will check to see if we can provide it.
ASTM D2028 – Standard Specification for Cutback Asphalt (Rapid-Curing Type) Description: Abstract This specification covers cutback petroleum asphalts of the rapid-curing type for use in the construction and treatment of pavements. The cutback asphalt shall not foam when heated to application temperature and shall conform to the requirements prescribed for the following: (1) kinematic viscosity, …
ASTM D2027 – Standard Specification for Cutback Asphalt (Medium-Curing Type) Description: Scope 1.1 This specification covers cutback petroleum asphalts of the medium-curing type for use in the construction and treatment of pavements. 1.2 The values stated in SI units or inch-pounds are to be regarded separately as standard. The values stated in each system may not be …
ASTM D2026 – Standard Specification for Cutback Asphalt (Slow-Curing Type) Description: Scope 1.1 This specification covers cutback petroleum asphalts of the slow-curing type for use in the construction and treatment of pavements. 1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may …
ASTM D2020 – Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard (Withdrawn 2009) Description: Significance and Use Paper products used or stored in damp warm atmospheres or in contact with damp soil are subject to attack by fungus and other microorganisms. These test methods cover procedures for evaluating the degree of resistance …
ASTM D2017 – Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods (Withdrawn 2014) Description: Significance and Use This test method is useful in determining the relative decay resistance between various species of wood. It is an initial means of estimating the ability of a wood species to resist severe microbial …
ASTM D2015 – Standard Test Method for Gross Calorific Value of Coal and Coke by the Adiabatic Bomb Calorimeter (Withdrawn 2000) Description: Scope 1.1 This test method covers the determination of the gross calorific value of coal and coke by the adiabatic bomb calorimeter. 1.2 The values stated in SI units and British thermal units …
ASTM D2013 – Standard Practice for Preparing Coal Samples for Analysis Description: Significance and Use 5.1 Other standards are used to collect the gross sample: Practice D2234/D2234M allows for one division of the gross sample before crushing. The mass and top size of the gross or divided sample collected by using these guides and practices are usually too …
ASTM D2008 – Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products Description: Significance and Use 5.1 The absorbance of liquids and the absorptivity of liquid and solids at specified wavelengths in the ultraviolet are useful in characterizing petroleum products. Scope 1.1 This test method covers the measurement of the ultraviolet absorption of a variety …
ASTM D2007 – Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method Description: Significance and Use 5.1 The composition of the oil included in rubber compounds has a large effect on the characteristics and uses of the compounds. The determination of the saturates, …
ASTM D2000 – Standard Classification System for Rubber Products in Automotive Applications Description: Scope 1.1 This classification system covers the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. NOTE 1: This classification system may serve …
