Materials Characterization Services
Search for Analytical Techniques and Test Methods
We are currently working on updating our list of supported methods. If you don’t see the test method you need below, please submit a special request with details about the method you need and we will check to see if we can provide it.
ASTM D1417 – Standard Test Methods for Rubber Latices—Synthetic Description: Abstract This standard covers the test methods for synthetic rubber lattices ABR, BR, CR, IIR, NBR, NCR, NIR, PBR, PSBR, SBR, SCR, SIR, synthetic rubber lattices with substituted carboxylic acid groups on the polymer chain, and reinforced synthetic rubber lattices. Covered tests include the procedure …
ASTM D1415 – Standard Test Method for Rubber Property—International Hardness Description: Significance and Use 4.1 The International Hardness test is based on measurement of the penetration of a rigid ball into the rubber specimen under specified conditions. The measured penetration is converted into IRHD, the scale of degrees being so chosen that 0 represents a material …
ASTM D1414 – Standard Test Methods for Rubber O-Rings Description: Significance and Use 4.1 These test methods provide acceptable procedures for quality control purposes and for the determination of engineering characteristics. Scope 1.1 These test methods describe the procedures for determining the physical properties of O-rings and changes in these properties due to aging. 1.2 The values stated …
ASTM D1413 – Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures (Withdrawn 2016) Description: Significance and Use This test method is useful in the development of new wood preservatives and preservative systems by evaluating the minimum preservative retention to prevent decay under laboratory conditions. The results are used to facilitate target retentions in …
ASTM D1405 – Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019) Description: Significance and Use 4.1 This test method is intended for use as a guide in cases where an experimental determination of heat of combustion is not available and cannot be made conveniently, and where an estimate is …
ASTM D1404 – Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease Description: Significance and Use 5.1 The significance of the number of scratches as far as correlation with field performance is concerned has not been established. A particle which is abrasive to plastic will not necessarily be abrasive to steel or other bearing …
ASTM D1403 – Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment Description: Significance and Use 5.1 These test methods are applicable to greases of National Lubricating Grease Institute (NLGI) consistency numbers 0 to 4 and are intended for use only where the size of the sample prevents the …
ASTM D1401 – Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids Description: Significance and Use 5.1 This test method provides a guide for determining the water separation characteristics of oils subject to water contamination and turbulence. It is used for specification of new oils and monitoring of in-service oils. Scope 1.1 This test …
ASTM D1400 – Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006) Description: Scope 1.1 This test method covers the nondestructive measurement of the dry film thickness of electrically nonconductive coatings applied over a nonferrous metal base using commercially available eddy current instruments. …
ASTM D1394 – Standard Test Methods for Chemical Analysis of White Titanium Pigments Description: Abstract These test methods cover procedures for the chemical analysis of white titanium dioxide pigments. The analytical procedures appear in the following order: sample preparation, qualitative analysis, moisture content determination, total titanium content determination by Jones Reductor and Aluminum Reduction methods, …
