Materials Characterization Services
Search for Analytical Techniques and Test Methods
We are currently working on updating our list of supported methods. If you don’t see the test method you need below, please submit a special request with details about the method you need and we will check to see if we can provide it.
ASTM D5034 – Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) Description: Significance and Use 5.1 The grab test procedure in this test method for the determination of breaking force and elongation is considered satisfactory for acceptance testing of commercial shipments of most woven or nonwoven textile fabrics, and the modified …
ASTM D5029 – Standard Test Method for Water Solubles in Activated Carbon Description: Significance and Use 5.1 In certain applications, the ash, color, conductivity, or pH of the finished activated carbon product may be influenced by the quantity of water solubles it contains. This water solubles test provides a relative indication of the quantity of soluble …
ASTM D5028 – Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis Description: Significance and Use 5.1 Differential scanning calorimeters are used to determine chemical reaction thermal profiles of materials. One such reaction is the curing of thermosetting resins. 5.2 This test method is useful for both specification acceptance and for research. Scope 1.1 This …
ASTM D5026 – Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension Description: Significance and Use 5.1 This test method provides a simple means of characterizing the thermomechanical behavior of plastic materials using very small amounts of material. The data obtained is used for quality control, research and development, as well as the establishment of …
ASTM D5024 – Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression Description: Significance and Use 5.1 This test method provides a simple means of characterizing the thermomechanical behavior of plastic compositions using very small amounts of material. The data obtained can be used for quality control and/or research and development purposes. For some classes …
ASTM D5023 – Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending) Description: Significance and Use 5.1 This test method provides a simple means of characterizing the thermomechanical behavior of plastic compositions using very small amounts of material. The data obtained is used for quality control, research and development as well as the …
ASTM D5016 – Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption Description: Significance and Use 5.1 The sulfur mass fraction of the ash derived from coal or coke can be calculated to sulfur trioxide mass fraction. This information can be used in …
ASTM D5009 – Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions Description: Significance and Use 5.1 Subject to the limitations listed above, the procedure can be used as a research tool to optimize spray equipment and paint formulations as well as to study the relative effect on transfer …
ASTM D5007 – Standard Test Method for Wet-to-Dry Hiding Change Description: Significance and Use 5.1 Many architectural paints, particularly white and light tints, change significantly in film opacity as they dry. An increase in hiding is sometimes associated with porosity and poor film integrity with conventionally formulated coatings. A decrease can result in a disappointing paint …
ASTM D5006 – Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels Description: Significance and Use 5.1 DiEGME is miscible with water and can be readily extracted from the fuel by contact with water during shipping and in storage. Methods are therefore needed to check the additive content in the …
